Basic Motorcycle Maintenance Tips for Owners

Riding motor cycle can be exhilarating. When it comes to maintenance, we all depend on repair shop, but every owner should develop a sense of confidence every time they ride with respect to basic maintenance knowledge. It is highly essential to avoid unforeseen mechanical failures. Basic technical knowhow helps keeping the motor cycle fit and running without hassle. Now, there is no need to get admitted into an automobile training school. Are you thinking of mastering your own motor cycle repair? Absolutely not required! Basic maintenance skill will help you stay independent, save time, save money and save yourself from accidents.

Change the engine oil:

Your motor cycle has an owner’s manual where you can find out the frequency of engine oil change. Generally, technicians advise to change the oil after riding 2500 kilometres. Sometimes, this figure varies as per the type of oil used (mineral, semi-synthetic, fully synthetic). So you can change the oil using a wrench. It’s not that difficult.

Check tire pressure:

You just need a tyre gauge to check the pressure. Generally, manufacturers recommend an ambient temperate I.e, when the tyres is cold to check pressure. Pressure recommendation vary based on specific model. These details can be found in the manual. If the pressure is low, consider filling air. If you have a personal compressor or simply a bicycle pump at home do it now.

Clean the air filter:

Whether it is a paper filter, cotton filter, or foam filter inspect the cleanliness every time you change engine oil. Remove the filter from its housing and clean it properly following manual. If it is a paper filter, you can’t clean it. For satisfaction, blow air for cleaning. If it is a foam one, use air flow and in case of cotton, cleaning fluid can be used. It will help your engine get plenty of fresh air.

Check the battery:

Battery performance depends on quality and maintenance. If the battery is older than 3 years, it’s time to be cautious. You must inspect and change it immediately if it doesn’t keep charge. If you face dim light, problem in start, etc. check the voltage scale test using a multimeter.

Grease cables and chain:

It is very important to oil and grease cable housing, chain and some other jerk fittings. Consider greasing in points like sliding points, pivoting points and rotating points. So lubricate whenever you find these places dry.

Clean the body:

This task should be performed in a regular interval to protect the motor cycle from dirt, and to protect the original paint. Regular cleaning also helps avoid junk in iron parts and maintain a shiny look.

All the above needs a little effort to upkeep the vehicle and enjoy a worry free ride. These maintenance efforts require a little automotive technical knowledge. Once you start doing tem, everything will be easy.